Сountry of origin | Great Britain |
---|---|
Brand | Hylomar |
Use | Non-setting and non-hardening gasketing compound made with non-chlorinated solvent |
Colour | Blue |
Temperature range | From -50° C to + 250° C |
Product Sizes | 75 ml tube |
Note | Can be used instead of Aerograde PL32 |
Hylomar Ltd manufactures a wide range of high performance sealants and adhesives used by many of the leading OEM’s in the world of automotive, aerospace, white goods, power generation/distribution, electronics/photonics and general engineering. Hylomar products are also widely used and respected in the automotive, aerospace and industrial aftermarkets with Hylomar Universal Blue and Hylomar M (Light, Medium, Heavy) being the leading non-setting gasket & jointing compounds in the world. Hylomar Aerograde, Aerograde Ultra and Advanced Formulation are specified by various aero-engine manufacturers; including Rolls-Royce and Pratt & Whitney. Hylomar Aerograde is also specified by NATO.
Hylomar Aerograde Ultra is a non-Setting and non-hardening gasketing compound made with non-chlorinated solvent for use in the aeronautical industry with a wide operating temperature of -50°C to +250°C. This product carries the same Rolls Royce MSRR 9055 approval as the Aerograde product and OMAT numbers 4/47A (standard version).
Hylomar Aerograde Ultra is resistant to air, water and oils; turbine and piston engine combustion products; water/glycol and methanol/water mixtures; petroleum and synthetic diester lubricating oils.
- Made with non-chlorinated Solvent
- Non-hardening and non-setting
- Resistant to air, water and oils
- Specified worldwide by OEM’s
- Wide operating temperatures (- 50°C to +250°C)
- Easy to use
- Unlimited assembly time
- Easy to disassemble components
- For use on metal and plastic close fitting components
- Use as a non-curing thread sealant
- Resists vibration
- Easy to apply to vertical and underside joints due to its thixotropic properties
- Can be used with or without a gasket
Typical Physical Properties
FILM THICKNESS [MM] |
TYPICAL SURFACE FINISH [ΜM RA] |
AREA COVERED BY 100G [M²] |
PRODUCT COVERAGE AFTER DRYING [MG / CM²] |
---|---|---|---|
HYLOMAR AEROGRADE PL32 [LIGHT GRADE] |
|||
0.015 | 2.0 |
1.875 |
2 |
HYLOMAR AEROGRADE PL32 [MEDIUM GRADE] |
|||
0.03 | 3.0 | 1.275 |
4 |
HYLOMAR AEROGRADE PL32 [HEAVY GRADE] |
|||
0.09 | 3.5 | 0.56 | 12 |
Documentation
-
Hylomar® Aerograde Ultra PL32A.pdf
1019.89 Kb -
Hylomar® Aerograde Ultra PL32A - American MSDS.pdf
176.04 Kb -
Hylomar® Aerograde Ultra PL32A - English MSDS.pdf
146.28 Kb -
Hylomar® Aerograde Ultra PL32A - German MSDS.pdf
51.37 Kb -
Hylomar® Aerograde Ultra PL32A - Product Leaflet.pdf
1019.89 Kb -
Hylomar® Aerograde Ultra PL32A - TDS.pdf
155.26 Kb