Catalog

Catalog

Contact

198152, St. Petersburg,
st. Krasnoputilovskaya,
5 letter A, pom. 15Н, office 510

+7 (812) 922-49-19
Сompany presentation 1,4 mb

Сountry of origin Germany
Brand SpanSet-secutex
Purpose The protection against „sharp edges“
Material Secutex

secutex SF-1 – protective sleeve coating on one side

The secutex SF-1 has been technically designed for optimal use with the SpanSet flat sling range or the SpanSet round slings. The contact side has a secutex coating, is extremely cut-resistant and reduces the formation of creases in the fabric. Easily clipped onto the textile lifting gear, the protective sleeve with the one-sided secutex coating equally protects the lifting gear and the load at „sharp edges“ and rough surfaces. The secutex protective sleeve also comes with two contact sides in the „SF-2“ version. 

Features and benefits:

  • Easy to position;
  • Extremely cut-resistant;
  • Reduces creasing in the fabric;
  • Permanent dimensional stability;
  • Lifting gear remains movable inside the sleeve secutex SF-1: One contact side and one sleeve side are secutex-coated.
Suitable for MagnumPlus Nominal lifting capacity
[kg]
Designation Secutex SF-1 Approx.
inside width
[mm]
Approx. outside width
[mm]
Approx. outside height
[mm]
Approx. weight per running m
[kg]
Art.№

Type: Secutex SF-1 №3

MagnumPlus 10000
10.000 SF-1 200-20/3 145 165 25 2,4 SF1.2020.3
MagnumPlus 15000
15.000 SF-1 250-25/3   185 210 50 4,6
SF1.2525.3
MagnumPlus 20000
20.000 SF-1 300-30/3 245 265 45 3,7 SF1.3030.3
MagnumPlus 25000
25.000 SF-1 300-35/3  245 275 50 4,0 SF1.3035.3
MagnumPlus 30000
30.000 SF-1 350-40/3  310 340 35 4,6 SF1.3540.3
MagnumPlus 40000
40.000 SF-1 350-50/3  340 365 60 4,9 SF1.3550.3
MagnumPlus 50000
50.000 SF-1 400-50/3  340 365 60 4,9   SF1.4050.3
MagnumPlus 60000
60.000 SF-1 400-70/3  400 425 90 8,4 SF1.4070.3
MagnumPlus 80000 80.000 SF-1 450-80/3 450 480 90 8,9 SF1.4580.3
MagnumPlus 100000 100.000 SF-1 500-80/3 500 530 105 13,0 SF1.5080.3
MagnumPlus 150000 150.000 SF-1-675x80/3 - - - SF1.67580.3

Type: Secutex SF-1 №5

MagnumPlus 10000
10.000 SF-1 100-20/5  55 70 25 - SF1.00030.5
MagnumPlus 15000
15.000 SF-1 125-25/5  55 70 25 - SF1.00030.5
MagnumPlus 20000
20.000 SF-1 125-30/5 55 70 25 - SF1.00050.5
MagnumPlus 25000
25.000 SF-1 150-35/5 65 80 25 - SF1.00050.5
MagnumPlus 30000
30.000 SF-1 150-40/5 65 80 25 - SF1.00065.5
MagnumPlus 40000
40.000 SF-1 200-50/5 80 95 25 - SF1.00060.5
MagnumPlus 50000
50.000 SF-1 220-50/5 80 125 25 - SF1.00060.5
MagnumPlus 60000
60.000 SF-1 250-70/5 105 125 25 - SF1.00060.5
MagnumPlus 80000 80.000 SF-1 250-80/5 250 290 100 - available upon request
MagnumPlus 100000 100.000 SF-1 280-90/5 280 320 120 - available upon request
MagnumPlus 150000 150.000 - - - - - available upon request

SF-2 – Protective sleeve coating on two sides The SF-2 is particularly robust and this version has two contact sides to enable working on both sides. Both contact sides have a secutex coating, are extremely cut-resistant and reduce the formation of creases in the fabric. It is no longer necessary to turn the protective sleeve, and application errors are effectively prevented.

Suitable for MagnumPlus
Nominal lifting capacity
[kg]
Designation Secutex SF-2 Approx.
inside width
[mm]
Approx. outside width
[mm]
Approx. outside height
[mm]
Approx. weight per running m
[kg]
Art.№

Type: Secutex SF-2 №3        

MagnumPlus 10000
10.000 SF-2 200-20/3 145 165 25 3,5 SF2.2020.3
MagnumPlus 15000
15.000 SF-2 250-25/3   185 210 50 5,9
SF2.2525.3
MagnumPlus 20000
20.000 SF-2 300-30/3 245 265 45 5,5 SF2.3030.3
MagnumPlus 25000
25.000 SF-2 300-35/3  245 275 50 5,5 SF2.3035.3
MagnumPlus 30000
30.000 SF-2 350-40/3  310 340 35 6,8 SF2.3540.3
MagnumPlus 40000
40.000 SF-2 350-50/3  340 365 60 10,0 SF2.3550.3
MagnumPlus 50000
50.000 SF-2 400-50/3  340 365 60 8,7   SF2.4050.3
MagnumPlus 60000
60.000 SF-2 400-70/3  400 425 90 13,0 SF2.4070.3
MagnumPlus 80000 80.000 SF-2 450-80/3 450 480 90 - SF2.4580.3
MagnumPlus 100000 100.000 SF-2 500-80/3 500 530 105 - SF2.5080.3
MagnumPlus 150000 150.000 SF-2-675x80/3 - - - SF2.67580.3

Type: Secutex SF-2 №5

MagnumPlus 10000
10.000 SF-2 100-20/5  55 70 25 - SF2.00030.5
MagnumPlus 15000
15.000 SF-2 125-25/5  55 70 25 - SF2.00030.5
MagnumPlus 20000
20.000 SF-2 125-30/5 55 70 25 - SF2.00050.5
MagnumPlus 25000
25.000 SF-2 150-35/5 65 80 25 - SF2.00050.5
MagnumPlus 30000
30.000 SF-2 150-40/5 65 80 25 - SF2.00065.5
MagnumPlus 40000
40.000 SF-2 200-50/5 80 95 25 - SF2.00060.5
MagnumPlus 50000
50.000 SF-2 220-50/5 80 125 25 - SF2.00060.5
MagnumPlus 60000
60.000 SF-2 250-70/5 105 125 25 - SF2.00060.5
MagnumPlus 80000 80.000 SF-2 250-80/5 250 290 100 - available upon request
MagnumPlus 100000 100.000 SF-2 280-90/5 280 320 120 - available upon request
MagnumPlus 150000 150.000 - - - - - available upon request

secutex Clip-SC – protective sleeve with a longitudinal opening

The secutex Clip-SC, which can only be used on one side, can be very quickly clipped onto the lifting gear thanks to the mounting slot on the back. It is preferably used whenever round slings and flat slings with or without a protective sleeve are required on a case-by-case basis. The Clip-SC makes for easy handling and short set-up times. The secutex protective layer can be placed softly and flexibly on the load, thereby increasing the radius at the critical edges. The leverage forces are extensively distributed and the load remains undamaged.

Optionale versatility

secutex Clip-SC is perfectly adapted to the SpanSet round slings and flat slings and is available in versions with different surface finishes and with reinforcement. For more information about secutex and the different surface finishes. easyClip Similar to the Clip-SC in terms of design, but with different material properties, easyClip is the simple version of the clip sleeve.

Features and benefits:

  • With fitting slot on the back;
  • Quick and easy to attach for anyone;
  • Virtually indestructible;
  • Permanent dimensional stability;
  • Reduces creasing in the fabric
Suitable for MAGNUMPLUS
 Nominal lifting capacity
[kg]
Designation Secutex Clip-SС
Approx.
inside width
[mm]
Approx. outside width
[mm]
Approx. outside height
[mm]
Approx. weight per running m [kg]
Art.№

Type: Secutex Clip-SC №3

MagnumPlus 10000
10.000
SC- 200-20/3  145 175 35 3,5 SC.20020.3
MagnumPlus 15000
15.000
SC-250-25/3  185 210 50 5,9   SC.25025.3
MagnumPlus 20000
20.000 SC-300-30/3  245 265 45 5,5 SC.30030.3
MagnumPlus 25000
25.000 SC-300-35/3  255 275 50 5,5 SC.30035.3
MagnumPlus 30000
30.000 SC-300-40/3  310 340 35 6,8 SC.30040.3
MagnumPlus 40000
40.000 SC- 350-50/3 340 365 60 10,0 SC.35050.3
MagnumPlus 50000
50.000 SC-400-50/3 
340 365 60 10,0
SC.40050.3
MagnumPlus 60000 60.000 SC-2-250-70/3  
220 520 100 20,6 SC.25070.3
MagnumPlus 80000 80.000  SC-2-250-80/3   250 580 100 27,6 SC.25080.3
MagnumPlus 100000 100.000  SC-2-515-90/3   280 535 120 38,4 SC.51590.3
MagnumPlus 150000 150.000 - - - - - available upon request

Type: Secutex Clip-SC №5

MagnumPlus 10000
10.000 SC- 100-20/5  95 110 35 2,3 SC.10020.5
MagnumPlus 15000
15.000 SC-125-25/5  105 125 50 3,7 SC.12525.5
MagnumPlus 20000
20.000 SC-125-30/5 125 145 50 4,2 SC.12530.5
MagnumPlus 25000
25.000 SC-150-35/5 135 155 50 3,6 SC.15035.5
MagnumPlus 30000
30.000 SC-150-40/5  155 175 60 5,2
SC.15040.5
MagnumPlus 40000 40.000 SC- 200-50/5 185 210 70 6,5 SC.20050.5
MagnumPlus 50000
50.000 SC-220-50/5 220 240 75 8,9 SC.22050.5
MagnumPlus 60000
60.000 SC-250-70/5 220 240 100 10,3 SC.25070.5
MagnumPlus 80000 80.000 SC-250-80/5 250 290 100 13,8   SC.25080.5
MagnumPlus 100000 100.000 SC-280-90/5 280  320 120 19,2 SC.28090.5
MagnumPlus 150000
150.000 - - - - - available upon request

Contact us

*