Catalog

The secutex protective sleeve is optimally coordinated from a technical standpoint for the span-set lashing belt programme or the span-set round slings. The contact side is coated with secutex. It is extremely resistant and minimises the build-up of wrinkles in the textile. The secutex protective sleeve with single-sided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

Protective sleeve coating on one side

The secutex SF-1 has been technically designed for optimal use with the SpanSet flat sling range and the SpanSet round slings. The contact side of the protective sleeve has a secutex coating, is extremely cut-resistant and reduces the formation of creases in the fabric. Easily clipped onto the textile lifting gear, the protective sleeve with the one-sided secutex coating equally protects the lifting gear and the load at „sharp edges“ and rough surfaces.

Designed for the application

On request, the protective sleeve also comes in a version with two-sided secutex-coating as secutex SF-2. This means that both sides can be used for lifting and mistakes can be minimised. secutex SF-1 and SF-2 are available with different surface structures (p. 14), such as the slightly rough „ground surface finish“. It is used whenever the contact side comes into contact with small amounts of liquids. The interrupted surface remains permanently slip-resistant and its handling is more pleasant for the user. The use of steel plates (reinforcement) for even greater cut resistance or the Tropic-coating for use in permanently moist environments are optionally available for the SF-1. This means that the protective sleeve can be adapted to your individual needs.

Features and benefits:

• Easy to position;
• Extremely cut-resistant;
• Reduces creasing in the fabric;
• Permanent dimensional stability;
• Lifting gear is movable inside the sleeve
  

SF-2 – Protective sleeve coating on two sides

The SF-2 is particularly robust and this version has two contact sides to enable working on both sides. Both contact sides have a secutex coating, are extremely cut-resistant and reduce the formation of creases in the fabric. It is no longer necessary to turn the protective sleeve, and application errors are effectively prevented.

Designed for the application secutex SF-1 and SF-2 are available in different surface finishes, such as „ground“, whose surface is slightly roughened. It is used whenever the contact side comes into contact with small amounts of liquids. The rough surface remains permanently slip-resistant. The use of steel plates (reinforcement), which significantly increases cut resistance, or the Tropic-coating for use in permanently moist environments are optionally available. This means that the protective sleeve can be adapted to your individual application.

secutex Clip-SC – easy to handle, quick to attach

Clip with longitudinal opening

Thanks to the mounting slot on the back, the secutex Clip-SC can be quickly mounted by the user when needed – whether on single- or double-strand straps. The protective clip is easy to handle and quick to set up, and is preferably used in environments with constantly changing requirements and whenever round slings with or without additional protection are needed. The permanently stable protective sleeve reduces the formation of creases. The secutex protective layer can be placed softly and flexibly on the load, thereby increasing the radius at the critical edges. The leverage forces are extensively distributed and the load remains undamaged.

Different designs secutex Clip-SC comes with different surface finishes or also with inserted steel plates for increased cut protection. 

Features and benefits:

• With mounting slot on the back;
• Quick and easy for anyone to mount;
• Virtually indestructible;
• Permanent dimensional stability;
• Reduces creasing in the fabric