Сountry of origin | Germany |
---|---|
Brand | SpanSet |
Purpose | The protection against „sharp edges“ |
Material | HMPE |
NoCut®sleeve – woven protective sleeve with all-round cut protection
The protective sleeve NoCut® made of HPME fibres is simply slid over the round sling and placed against the sharp edge of the load to protect the lifting gear. The fabric-reinforced sleeve can also be fitted by the user as shown in Figure 3. On request, the single legs of a round sling can also be fitted with NoCut® sleeve at the factory.
Long service life and maximum safety NoCut®sleeve is supple and flexible, allowing the protective sleeve to be easily positioned on the load even in tight spaces. The design of the sleeve with equally high all-round cut resistance makes for a long service life, as it can be used on both sides, and offers the highest level of operational safety, as application errors are excluded. NoCut® sleeve is delivered as a prefabricated cut with trimmed edges. As standard, the protective sleeves are offered with lengths in 250-mm increments and widths ranging from 45 mm to 315 mm.
More about NoCut® For more information about the NoCut® products and the product finder, which can be used to easily identify the right NoCut® product for textile lifting gear in just a few steps online.
Features and benefits:
- Low dead weight;
- Supple and flexible;
- High cut protection due to ribbed reinforcement;
- Minimises application errors as it can be used on both sides;
- Tested and certified – 2-ply label with instructions for use
Suitable for SUPRAPLUS |
Nominal lifting capacity [kg] |
Designation - NoCut sleeve |
Approx. inside width [mm] |
Approx. outside width [mm] |
Approx. outside height [mm] |
Approx. weight per running m [kg] |
Art.№ |
---|---|---|---|---|---|---|---|
Type: NoCut sleeve №3 |
|||||||
SupraPlus 500 | 500 | NCS-075 | 75 | 85 |
13 |
0,6 | NCS.075.00 |
SupraPlus 1000 | 1.000 | NCS-105 |
105 |
115 |
13 |
0,8 |
NCS.105.00 |
SupraPlus 2000 | 2.000 | NCS-105 |
105 |
115 |
13 |
0,8 |
NCS.105.00 |
SupraPlus 3000 | 3.000 | NCS-105 | 105 |
115 |
13 |
0,8 |
NCS.105.00 |
SupraPlus 4000 | 4.000 | NCS-135 |
135 |
145 |
13 |
1,1 |
NCS.135.00 |
SupraPlus 5000 | 5.000 | NCS-135 | 135 |
145 |
13 |
1,1 |
NCS.135.00 |
SupraPlus 6000 | 6.000 | NCS-135 |
135 |
145 |
13 |
1,1 |
NCS.135.00 |
SupraPlus 8000 | 8.000 | NCS-165 |
165 |
175 |
13 |
1,4 | NCS.165.00 |
Type: NoCut sleeve №5 |
|||||||
SupraPlus 500 | 500 | NCS-055 | 55 | 65 | 13 | 0,4 | NCS.055.00 |
SupraPlus 1000 | 1.000 | NCS-055 | 55 | 65 | 13 | 0,4 | NCS.055.00 |
SupraPlus 2000 | 2.000 | NCS-75 | 75 | 85 | 13 | 0,6 | NCS.075.00 |
SupraPlus 3000 | 3.000 | NCS-75 | 75 | 85 | 13 | 0,6 | NCS.075.00 |
SupraPlus 4000 | 4.000 | NCS-75 | 75 | 85 | 13 | 0,6 | NCS.075.00 |
SupraPlus 5000 | 5.000 | NCS-75 | 75 | 85 | 13 | 0,6 | NCS.075.00 |
SupraPlus 6000 | 6.000 | NCS-105 | 105 | 115 | 13 | 0,8 | NCS.105.00 |
SupraPlus 8000 | 8.000 | NCS-105 | 105 | 115 | 13 | 0,8 | NCS.105.00 |
NoCut®pad – particularly high cut protection
NoCut®pad is the combination of NoCut® sleeve with an internal fabric bridge that has fastening elements on both ends. The NoCut® pad model range offers the user three alternatives to fasten the protective plate to the lifting gear: Velcro strap , Velcro strap with a frame buckle or 2-piece metal buckle (frame or triple bridge).
NoCut® pad is mounted there where the lifting gear lies flat against the sharp edge. For the user this means: High flexibility, low material requirement and high safety when handling sharp-edged loads! The size of the edge protection can be exactly dimensioned for the danger area and precisely positioned on the sharp edge. Although NoCut® pads normally come in short lengths, there are additional attachment loops for the longer variants.
NoCut® pad is offered as a 2-layer or 4-layer version. This multilayer design achieves an extremely high level of cut protection and offers the user many options, also for critical lifting procedures.
Use of the HMPE material allows the user to deploy the textile protective plate in temperatures ranging from -40 °C up to +60 °C. As standard, NoCut® pads are produced in lengths from 500 mm to 1,500 mm in 250-mm increments.
NoCut® Produkt-Finder
All SpanSet flat slings and round slings can be protected against sharp edges with NoCut® pad. Even the extremely compact Magnum-X round slings can be used to lift loads up to a load capacity of 30 t with the protective plates. Turning and rotating loads is not permitted – please use NoCut® sleeve for these operations. The NoCut® product finder , which can be used to easily identify the right NoCut® product for textile lifting gear in just a few steps online, can help you to select the rights pads for your application.
Features and benefits:
- Perfect for use with sharp edges;
- Very low dead weight;
- Flexible construction;
- High operational safety due to tested quality;
- High cut resistance;
- Sewn label with handling instructions
Model | Number of layers |
Approx. inside width [mm] |
Approx. outside width [mm] |
Fastening method |
---|---|---|---|---|
NCP-065-KB | 2 | 55 |
65 |
Velcro fastener |
NCP-085-KB |
2 |
75 |
85 |
Velcro fastener |
NCP-115-KB |
2 |
105 |
115 |
Velcro fastener |
NCP-145-KB | 2 |
135 |
145 |
Velcro fastener |
NCP-175-KB |
2 |
165 |
175 |
Velcro fastener |
NCP-065-KR | 2 |
55 |
65 |
Velcro fastener with clasp |
NCP-085-KR |
2 |
75 |
85 |
Velcro fastener with clasp |
NCP-115-KR |
2 |
105 |
115 |
Velcro fastener with clasp |
NCP-145-KR | 2 | 135 | 145 | Velcro fastener with clasp |
NCP-145-KR | 4 | 135 | 145 | Velcro fastener with clasp |
NCP-175-KR | 2 | 165 | 175 | Velcro fastener with clasp |
NCP-175-KR | 4 | 165 | 175 | Velcro fastener with clasp |
NCP-065-ST | 2 | 55 | 65 | Snap buckles |
NCP-085-ST | 2 | 75 | 85 |
Snap buckles |
NCP-115-ST | 2 | 105 | 115 | Snap buckles |
NCP-145-ST | 2 | 135 | 145 | Snap buckles |
NCP-145-ST | 4 | 135 | 145 | Snap buckles |
NCP-175-ST | 2 | 165 | 175 | Snap buckles |
NCP-175-ST | 4 | 165 | 175 |
Snap buckles |