Catalog

secutex SF-1 – protective sleeve coating on one side

Protective sleeve coating on one side The secutex SF-1 has been technically designed for optimal use with the SpanSet flat sling range or the SpanSet round slings. The contact side has a secutex coating, is extremely cut-resistant and reduces the formation of creases in the fabric. Easily clipped onto the textile lifting gear, the protective sleeve with the one-sided secutex coating equally protects the lifting gear and the load at „sharp edges“ and rough surfaces.

Designed for the application secutex SF-1 is available in different surface finishes, such as „ground“, whose surface is slightly roughened. It is used whenever the contact side comes into contact with small amounts of liquids. The rough surface remains permanently slip-resistant. If necessary, secutex SF-1 is also available with a twi-sided coating in the SF-2 version, which precludes application errors when lifting sharp-edged loads. 

Features and benefits:

• One-sided secutex-coating;
• Easy to position;
• Extremely cut-resistant;
• Permanent dimensional stability

SF-2 – Protective sleeve coating on two sides The SF-2 is particularly robust and this version has two contact sides to enable working on both sides. Both contact sides have a secutex coating, are extremely cut-resistant and reduce the formation of creases in the fabric. It is no longer necessary to turn the protective sleeve, and application errors are effectively prevented.

Designed for the application

secutex SF-1 and SF-2 are available in different surface finishes (page 17), such as „ground“, whose surface is slightly roughened. It is used whenever the contact side comes into contact with small amounts of liquids. The rough surface remains permanently slip-resistant.

The use of steel plates (reinforcement), which significantly increases cut resistance, or the Tropic-coating for use in permanently moist environments are optionally available. This means that the protective sleeve can be adapted to your individual application.

secutex Clip-SC – protective sleeve with a longitudinal opening

The secutex Clip-SC is quickly attached thanks to the mounting slot on the back. It is preferably used whenever flat slings with or without a protective sleeve are required on a case-by-case basis. Important: The ClipSC makes for easy handling and short set-up times. The secutex protective layer can be placed softly and flexibly on the load, thereby increasing the radius at the critical edges. The leverage forces are extensively distributed and the load remains undamaged.

Optional versatility

secutex Clip-SC is available in versions with different surface finishes and with reinforcement. For more information about secutex and the different surface finishes.

easyClip

Similar to the Clip-SC in terms of design, but with different material properties, easyClip is the budget-friendly version of the clip sleeve. For more information, ask us about it! 

Features and benefits:

• Can be positioned during ongoing lifting procedures;
• Virtually indestructible;
• Permanent dimensional stability